An AlarmSense Base Sounder (45681-510APO).
- Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.
- 70d-87dB(A) sound output.
- Certified to EN54-3 by UL International (UK) Limited.
- Suitable for use with C-TEC's CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder base combination.
Technical
| Approvals/certifications |
Certified to EN54-5 by UL International (UK) Limited |
| Application/operation |
Designed to be ceiling mounted with an AlarmSense fire detector. Red and White caps available for stand alone use |
| Supply wiring |
2-wire monitored, polarity insensitive |
| Supply/operating voltage |
18-33VDC (sounders active); Less than 15VDC (sounders off) |
| Quiescent current |
Less than 20µA @ 12VDC |
| Nominal SPL (Sound Pressure Level) |
87dB(A) max (high volume setting); 70dB(A) nominal (low volume setting) |
| Alarm current |
5mA (sounder active current at 24V) |
| Product dimensions (mm) |
115mm diameter x 40mm deep (without optional AlarmSense detector) |
| Construction & finish |
White polycarbonate |
| IP Rating |
TBC |
| Weight |
150g |
Documents
AlarmSense Device Instructions
