Ei1529RC Hard Wired Alarm Control Switch.
The Ei1529RC is used to control all the alarms in a system from one place. It is recommended to fit a control switch if smoke, heat and carbon monoxide alarms have been fitted on the same system so the alarm that has sounded can be identified and action can be taken.
- Install as part of the system to get more control over your alarms
- Mains powered
- Hard wired interconnection
- Test, Locate and Silence
- Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarms
|White with Red accents
|Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms
|Provides warning of mains failure, as the ‘Test’ feature will not operate in the absence of mains power
|85dB(A) at 3m
|4°C to 40°C
|0 to 90% relative humidity
|90mm x 90mm x 40mm deep
|BS EN 14604:2005