An AlarmSense Optical Smoke Detector and Sounder Visual Indicator Base (55000-394APO).
Optical Smoke
- A high quality optical detector.
- Suitable for use with C-TEC's CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-7 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination.
Sounder Visual Indicator Base
- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3 by UL International (UK) Limited.
- Suitable for use with C-TEC's CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination.
Technical
Optical Smoke
| Approvals/certifications |
Certified to EN54-5 by UL International (UK) Limited |
| Application/operation |
Generates an alarm condition when it detects a pre-set threshold of smoke penetration into the smoke chamber |
| Supply wiring |
2-wire monitored, polarity insensitive |
| Supply/operating voltage |
9 to 33V DC |
| Quiescent current |
50µA @ 15 VDC |
| Alarm voltage |
9 to 33V DC |
| Alarm current |
1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V |
| Alarm reset voltage |
2V max (1 second alarm reset time) |
| Product dimensions (mm) |
100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base) |
| Construction & finish |
White polycarbonate |
| IP Rating |
TBC |
| Weight |
100g |
Sounder Visual Indicator Base
| Approvals/certifications |
Certified to EN54-5 by UL International (UK) Limited |
| Application/operation |
Designed to be ceiling mounted with an AlarmSense fire detector. Red and White caps available for stand alone use |
| Supply wiring |
2-wire monitored, polarity insensitive |
| Supply/operating voltage |
9 to 33V DC |
| Quiescent current |
Less than 20µA @ 12VDC |
| Alarm voltage |
9 to 33V DC |
| Nominal SPL (Sound Pressure Level) |
87dB(A) max (high volume setting); 70dB(A) nominal (low volume setting) |
| Alarm current |
5mA (sounder active current at 24V) |
| Product dimensions (mm) |
1115mm diameter x 40mm deep (without optional AlarmSense detector) |
| Construction & finish |
White/clear polycarbonate. Red and white caps available if not use with an AlarmSense fire detector |
| IP Rating |
TBC |
| Weight |
100g |
Documents
AlarmSense Device Instructions
